Artery Nugget AIO 40W Starter Kit

  • Ex Tax:$39.90
  • Product Code: M00001127
  • Available: In Stock
The Artery Nugget AIO Starter Kit, with the Mod and Tank all in one design, makes it the most comfortable feel..

The Artery Nugget AIO Starter Kit, with the Mod and Tank all in one design, makes it the most comfortable feeling in your hand, the ultra-compact size to fit your hand or your pocket. the Nugget AIO Kit adopts 1500mAh battery and max output 40W, working wattage adjustable from 5W to 40W by pressing the Up / Down buttons. with the Type-C charging port, no more worry about the direction when you insert the USB cable, with the 1.5A quick charging system, the Artery Kit will be fully charged in 1hour. the front panel of Artery Nugget with one bright LED display will show you the vaping data clearly. with magnet connection between the Mod and Tank, easy to install the Tank. there are 3 Coil Bases and 5 Various Coils available to meet the different vaping demands. comes with the Base A and 0.4ohm Mesh Coil for the intense flavor and huge vapor.  if you are the DIY lover, you also can choose the RBA Coil, which allows you to install the pre-built coils on it easily.


  • Size: 84*32*27mm
  • Colors: Black, Gun Metal, Red, Blue
  • Built-in 1500mAh Battery
  • Output Wattage Range: 5-40W
  • Resistance Range: 0.3-2.0ohm
  • Bright LED Display
  • Magnet Connection Between Mod And Tank
  • Intuitive Battery Indicator Light
  • 1.5A Quick Charging System
  • Charging Time: 1Hour
  • Type-C Charging Port
  • Over-Charge Protection
  • Over-Heat Protection
  • 8 Seconds Cut-Off
  • Short Circuit Protection
  • ---------------------------------------
  • 2ML E-Juice Capacity
  • Convenient Top E-Juice Refill
  • Bottom Airflow Adjustable
  • Clearly E-Juice Window
  • 3 Coil Bases Available
  • Coils:
  • 0.4ohm Mesh Coil ( Base A ), For Intense Flavor & Huge Vapor, Not Compatible With Pal 2 / Pal 2 Pro
  • 0.6ohm Mesh Coil ( Base B ), For Excellent Flavor  & Vapor Production, Compatible With Pal 2 / Pal 2 Pro
  • 1.0ohm Regular Coil ( Base B ), For Intense Flavor & Dense Vapor, Compatible With Pal 2 / Pal 2 Pro
  • 1.4ohm Regular Coil ( Base B ), For Best Flavor, Compatible With Pal 2 / Pal 2 Pro
  • RBA ( Base C ), For DIY, Best With ≥ 0.5ohm


1*Artery Nugget AIO Mod

1*Nugget AIO Tank

1*Extra Mesh Coil 0.4ohm

1*0.4ohm Mesh Coil Base


1*Type-C USB Charging Cable

1*User Manual

1*Warranty Card

Note: please ensure you have basic knowledge on how to properly use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage to the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

3) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
    Bad           Good