Steam Crave Glaz Mini MTL RTA 5ML

$39.90
  • Ex Tax:$39.90
  • Product Code: M00002850
  • Available: In Stock
The Steam Crave Glaz Mini MTL RTA, the diameter is 23mm, can hold 2ml e-juice comes with the extra part which ..

The Steam Crave Glaz Mini MTL RTA, the diameter is 23mm, can hold 2ml e-juice comes with the extra part which enlarges the capacity to 5ml. the newest Steam Crave with the 4big top refilling ports for the easy refill, you can inject your favorite e-juice without leaking, there are four small airflow adjustable holes on the base for the tight MTL vaping experience. the Glaz Mini RTA features the innovative large single coil deck allows you to build and wick easily, the 510 drip tip includes for the better MTL vaping experience.


How To Use:

1. Preferable use a 2ml I.D Coil, the resistance value above 0.6ohm.

2. Place the coil and bend coil legs to a 90-degree angle and tighten the coil.

3. Use a coil jig and lower the coil approx 1.5 to 2mm from the deck.

4. Strum the coil with low wattage.

5. Use a piece of Muji cotton approx 8mm, remove the outer layer.

6. Make the cotton nice and fluffy.

7. Use the notch under the deck to cut cotton to length.


Features:

  • Material: Stainless Steel + Pyrex Glass
  • Diameter: 23mm
  • Colors: Stainless Steel, Black, Gunmetal
  • Height With Drip Tip Of 2ML Tube: 40mm
  • Height With Drip Tip Of 5ML Tube: 49.6
  • 510 Drip Tip Included
  • Single Coil Building Deck Included
  • E-Juice Capacity: 2ml/5ml
  • Four Different Airflow Adjustable Holes For Tight MTL Vaping Experience
  • Ī¦3.5mm MTL Chimney
  • 4 Big Top-RefillingĀ  Ports For Easy E-Juice Refilling


Includes:

1*Glaz Mini RTA

1*5ML Extension Part

1*Extra Heating Chamber

1*Extra Glass Tube

1*Allen Key

1*O-Rings And Screws

1*User Manual

1*Sticker

Note: please ensure you have basic knowledge on how to properly use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of vape. Welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
    Bad           Good