Wotofo Squonk Cap For 60ML 100ML E Juice Bottle

$7.90
  • Ex Tax:$7.90
  • Product Code: M00000102
  • Available: In Stock
Description:The Wotofo Squonk Cap, which is designed for vapers who are into squonker mods, this is a very tho..

Available Options

Description:

The Wotofo Squonk Cap, which is designed for vapers who are into squonker mods, this is a very thoughtful tool to cut the hassle when refilling your squonk bottle, with this little cap, you just leave the squonk bottle in place and refill through the 510 connector. vapers can select variable colors of the wotofo squonk cap, the squonk refill cap mainly consists of two parts, the lid to keep the tool clean and the cap body that fits onto 60ml/100ml e juice bottles, both made from good grade aluminum to give a light but solid quality design, there is no need to worry about leakage problem as we eliminate leakage with carefully inserted silicone seals, which also act as insulators to keep from any tiny possible shorts. the bottom part of the cap and the lid both feature knurling design to give a better grip, once the cap is screwed onto your juice bottle, you can put the original cap away, because this cap can serve as the regular cap or the squonk refill cap at the same time.

 

How To Refill?

  • 1)Replace the original juice bottle cap with wototo easy fill squonk cap.
  • 2)Screw teh squonk cap ready bottle onto the mod through the 510 connector.
  • 3)Put the squonker mod in an upside down position and squeeze the air out of the squonk bottle.
  • 4)Flip the mod back and squeeze the juice bottle to fill the squonk bottle.
  • 5)Repeat as needed until the squonk bottle is full.
  • 6)Remove the squonk cap ready bottle from the mod.


Package:

1*Wotofo Squonk Cap

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage.use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc. please have a basic knowledge of vape. welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
    Bad           Good